Vinpro Cost Guide 2025 / 2026

KOSTE VAN PRIEELSTELSELS / COST OF TRELLIS SYSTEMS

Die koste van die prieelstelsels word bereken deur die nuutste pryse (BTW uitgesluit) vanaf verskeie verskaffers van pale, draad en an der materiaal te bekom. Die gemiddelde in setkostes hiervan word dan bereken en in ’n teoretiese model ingevoeg. Die prieelstelsel spesifieke behoefte per inset is in die model ingereken en na gelang van paallengtes en ryspasiërings aangepas om die koste van verskillende prieelstelsels te bepaal. Vir verti kale prieelstelsels is die pale in vakke van 6 m en vir alternatiewe prieelstelsels in vakke van 7.5 m elk geplant (tensy anders aangedui). Kontak gerus Vinpro se landbou-ekonome indien u hulp benodig met die bepaling van unieke prieelstelselkoste, met verskillende vak- en paallengtes en/of diktes, asook spesifieke pryse. Let daarop dat die bereke ninge as hulpmiddel verskaf word en van u werklike koste kan afwyk

The cost of trellis systems is calculated by obtaining the latest prices (excluding VAT) from various suppliers for poles, wire and other materials. The average input cost is then calculated and inserted into a theoretical model. The requirements for a specific trellis system per input are specified in the model and adjusted according to pole length and row spacing, in order to determine the cost of different trellis systems. Pole spacing of 6 m is used for vertical trellis systems and 7.5 m for alternative trellis systems (unless otherwise indicated). Contact Vinpro’s agricultural economists if you require any assistance with the calcula tion of your unique trellis system cost with regards to different panel and pole lengths, different widths and specific prices. Note that these calculations are only intended to provide guidance and may vary from your actual cost.

ALTERNATIEWE PRIEELSTELSELS / ALTERNATIVE TRELLIS SYSTEMS

Ry-spasiëring / Row-spacing

Tipe stelsel Type of system

Paal Pole

2.1

2.5

2.75

2.9

3

3.3

Skuinskap – 1.5 m kappaal Slanting trellis – 1.5 m slanting pole Skuinskap – 1.8 m kappaal Slanting trellis – 1.8m slanting pole

2.4 m (50 - 75)

–

–

106 716

100 777

97 887

89 057

2.4 m (50 - 75)

–

–

97 449

–

89 392

81 335

Gewelstelsel – 2.1 m paal Gable system – 2.1 m pole Fabrieksdak – 2.1 m paal Factory roof – 2.1 m pole

2.1 m (75 - 100)

–

–

144 752

–

132 854

120 956

2.1 m (75 - 100)

–

–

118 692

–

108 965

99 239

U-stelsel U-system

2.7 m (100 - 125)

–

–

–

–

151 505

137 762

Draadgewel Wire gable Lierstelsel Lyre system

1.5 m (50 - 75)

–

–

–

95 140

–

–

2.4 m (100 - 125)

–

–

–

–

157 522

–

Scott Henry

2.4 m (75 - 100)

134 025

114 154

102 725

–

94 228

85 731

Grobbelaar

2.1 m (75 - 100)

130 526

120 825

–

111 125

106 407

T-kap (1.2 m kappaal) T-system (2.1 m slanting pole)

2.4 m (75 - 100)

–

128 859

119 281

–

109 703

105 048

Om verwarring tussen die benamings en/ of konstruksie van verskillende prieelstelsels (spesifiek vertikale stelsels) te probeer uit skakel, word daar skematiese voorstellings verskaf. Hierdie skematiese voorstellings volg op die volgende bladsy, tesame met hul voorgestelde benamings en afkortings.

In order to eliminate any confusion between the names and/or construction of different trellis systems (specifically vertical systems), schematic representations are provided on the following pages, including their sug gested names and abbreviations.

50 • VINPRO KOSTEGIDS / COST GUIDE